天堂在线www中文,欧美成人家庭影院,国产午夜三级一区二区三,麻花视频在线观看电视剧恋爱真好

The steps for installing the car mold machine are as follows:

1. Prepare the work area to ensure that the ground is flat and clean. Prepare all necessary tools and equipment and confirm that the machine is in good working condition. At the same time, it is necessary to remove debris from the assembly site and maintain cleanliness in the operating area. Whenever possible, adjust the working environment to a horizontal level, taking into account the impact of environmental factors such as temperature control on the body.

2. Install the body in the preset position (adjustable with cushion blocks if necessary), make the body perpendicular to the ground plane, and fix the main body to prevent deformation or vibration from causing loss of accuracy and safety issues; For large stamping machines, this is particularly important and requires guidance and implementation from personnel.

3. Horizontal inspection and calibration of machine tool bed base: Use a level to measure whether the working surface of the slide rail platform under the spindle is parallel and whether the level on which it is machined is consistent before acceptance. This step is very important and must be carefully checked for accuracy before proceeding to the next step of operation to ensure that the normal operation of the equipment does not affect production efficiency and service life. One of the important measures to reduce maintenance rate, extend service life, and save costs is to. Also pay attention to checking whether the screws in each part are loose and tighten them in a timely manner to prevent unnecessary losses. The above information is for reference only. It is recommended to consult relevant technical personnel in the field for specific methods.