天堂在线www中文,欧美成人家庭影院,国产午夜三级一区二区三,麻花视频在线观看电视剧恋爱真好

The installation process of an automotive mold machine usually includes the following steps:

1. Preparation work: Firstly, it is necessary to clean the installation site to ensure that the ground is flat and free of debris. Then, based on the size and weight of the mold machine, select the appropriate installation position and support structure.

2. Installation foundation: Determine the size and depth of the foundation based on the weight and size of the mold machine. The foundation needs to be solid, flat, and able to withstand the weight and vibration of the mold machine. The installation of the foundation needs to be strictly carried out according to the design drawings to ensure the stability and safety of the foundation.

3. Install the mold machine: Place the mold machine on the foundation, adjust the level and verticality to ensure the stability and accuracy of the mold machine. Then fix the mold machine on the foundation and use fasteners such as bolts and nuts for fixation.

4. Connect the power and gas sources: Connect the power and gas sources of the mold machine to the corresponding equipment to ensure the stability and safety of the power and gas sources.

5. Debugging: After installation, it is necessary to debug and check whether the various functions of the mold machine, such as injection molding machine, servo motor, control system, etc., are normal. During the debugging process, it is necessary to follow the operating procedures to ensure the safety and stability of the mold machine.

The above is the installation process of the automobile mold machine. It should be noted that strict adherence to the operating procedures is required during the installation process to ensure the safety and stability of the mold machine.